Shanghai Banghuai Heavy Industry Machinery Co., Ltd.
Shanghai Banghuai Heavy Industry Machinery Co., Ltd.
Add to Cart
1, Product discriptions
6-s shaker (also known as 6S shaker, beneficiation shaker and FRP shaker) belongs to gravity beneficiation equipment, developed from plane chute, and later formed its own system characterized by its asymmetric reciprocating motion. The 6-s shaker is composed of three parts: bed surface, frame and transmission mechanism. The bed surface is trapezoidal or rhombic, with a transverse inclination of 1 ° ~ 5 °. Ore feeding trough and water feeding trough are configured above the inclined edge. Bed strips are arranged longitudinally on the bed surface, and their height decreases from the driving end to the opposite side. The whole bed surface is supported by a frame, and a transmission device is installed at one end of the bed surface. The latter can make the bed surface move forward and have the characteristics of rapid return motion when approaching the end, which is called differential motion.
6-s shaker is a common beneficiation equipment for separating fine-grained ores. When processing metal ores, the effective beneficiation particle size range is 3 ~ 0.019mm, and the upper limit particle size can reach 10mm. The outstanding advantage of 6-s shaker is high separation accuracy. After one separation, high-grade concentrate or waste tailings can be obtained, and multiple products can be connected at the same time. The flat 6-s shaker is easy to take care of and adjust. The main disadvantage is that the equipment covers a large area and the processing capacity per unit plant area is low.
2, Technical Parameters
appellation | unit | Coarse sand table | Fine sand table | slimer | |
Mesa dimension | length | mm | 4450 | 4450 | 4450 |
Drive side wide | mm | 1855 | 1855 | 1855 | |
Concentrate the wide | mm | 1546 | 1546 | 1546 | |
Maximum particle size | mm | 2 | 0.5 | 0.15 | |
For ore | t/d | 30-60 | 10-20 | 15-25 | |
Feed concentration | % | 25-30 | 20-25 | 15-25 | |
trip | mm | 16-22 | 11-16 | 8-16 | |
frequency | f | 15-48 | 48-53 | 50-57 | |
Table wash water | t/d | 80-150 | 30-60 | 10-17 | |
Transverse slope | ° | 2.45-4.5 | 1.5-3.5 | 1-2 | |
Longitudinal slope | % | 1.4 | 0.92 | … | |
Countertop Angle | ° | 32-42 | 40 | 42 | |
Processing area | … | 7.6 | 7.6 | 7.6 | |
Mesa length ratio | … | 2.6 | 2.6 | 2.6 | |
The motor power | KW | 1.1 | 1.1 | 1.1 | |
3, Working Principle
The application of shaking table has a history of nearly 100 years. The original shaking table was made for coal preparation in 1890 by using the asymmetric reciprocating motion of bed surface caused by impact. The 6-s shaker for beneficiation (beneficiation shaker) was made by A. Wilfley from 1896 to 1898 and adopts eccentric elbow mechanism. In 1918, plantio made another transmission mechanism with cam lever. These two 6-s shaker head structures are still in use after improvement. After the Second World War, Germany made a fast 6-s shaker with eccentric drive. The inertia spring type 6-s shaker was successfully developed in 1964 and has been popularized and applied in production.
4. Folding main structure
The shaker is mainly composed of eight parts: bed head, motor, slope regulator, bed surface, ore trough, water tank, incoming strip and lubrication system. Reciprocating motion is realized by crank connecting rod transmission mechanism. The motor drives the large pulley to drive the crankshaft to rotate through the belt drive, and the rocker moves up and down. When the rocker moves down, the elbow plate pushes the rear shaft and the reciprocating rod to move backward. The spring is compressed, and the bed surface is connected with the reciprocating rod through the linkage seat. Therefore, at this time, the bed surface also moves backward. When the rocker moves upward, it is pushed by the extension tension of the spring, Then the bed surface moves forward.
Tag:
Iron ore shaker Gold ore shaker Copper ore shaker Gold ore shaker Nickel ore shaker